[veeeight]

One more pic for this thread, Ignition Live using F125.

 

[veeeight]

I’m in the process of installing a Nextbase 522GW and I cannot see a diagram of the fuses.

Anyone else experience the same? I find it hard to believe MB didn’t include a fuse diagram. I did also check the manual.

First, open the engine compartment fusebox. In there is a folded piece paper with the fuse diagram for both fuse boxes.

 

[veeeight]

Too many threads on the same topic is a habitude of this forum! 😂

 

[veeeight]

One question What kind of piggyback fuse or adaptor i need to connect this hardwire with yellow/red cables? Thanks

Standard Piggyback Add-A-Circuit Blade Fuse Holder 12VDC 10A

Standard blade piggyback fuse holder featuring 2 fuse slots, suitable for adding additional circuits into your vehicles existing electrical system. The holder can be used to easily install accessories without the need for rewiring or splicing. Please note the fuse is not included and for...

www.switchelectronics.co.uk

 

[veeeight]

Use F125.

 

[veeeight]

You need a fuse in each piggy back fuse holder, or, have you installed the piggyback fuse back to front?

My pic is on post #75 (ignition feed only).

 

[veeeight]

Try 2A first.

 

[veeeight]

Hi all

Looking to install a parking battery to run the dashcam when it's installed. The best spot from a wiring viewpoint would be under the passenger front seat - the battery pack is 40mm high ( 150mm x 170mm x 38mm ) - is there enough room under the seat for it to fit? I plan on using velcro to hold it in place.

Thanks

Hi
I will be installing a dashcam into my new W177 when it arrives and I will be powering it from a Blackvue parking mode battery ( which will be hardwired to the fuse box in the passenger footwell ).

How much room is there underneath the passenger seat? The battery is about 40mm high.

Thanks

It depends on the spec of your car, there are ECU's under the seats depending on car spec, so space will vary according to model & spec.

You'll just have to wait for your actual car to see for yourself.

 

[veeeight]

Yes you need to fuse both slots!

 

[veeeight]

@markmccracken1974 I’ve moved your posts to this existing thread on hardwiring dashcams.

Please always search the forum first before starting new threads.